[SOLVED]Missing information in System Overview / System Tray

Raise/discuss any potential issues with MailEnable for consideration in project issue register.
Post Reply
webshaun
Posts: 246
Joined: Wed May 25, 2005 8:37 pm
Location: NJ
Contact:

[SOLVED]Missing information in System Overview / System Tray

Post by webshaun »

Under the system overview tab in the system tray information, a lot of information about filtering is missing. v 6.61 Enterprise
---
Shaun Rieman
Advanced Micro Technologies, LLC

webshaun
Posts: 246
Joined: Wed May 25, 2005 8:37 pm
Location: NJ
Contact:

Re: Missing information in System Overview / System Tray

Post by webshaun »

6.64 didn't fix the problem. It is showing the fields, but all the data rows are 0.
---
Shaun Rieman
Advanced Micro Technologies, LLC

MailEnable
Site Admin
Posts: 4441
Joined: Tue Jun 25, 2002 3:03 am
Location: Melbourne, Victoria Australia

Re: Missing information in System Overview / System Tray

Post by MailEnable »

Hi Shaun, sorry for the confusion; unfortunately there was a problem with the build. The solution is to kill all instances of metray.exe and then download this into your MailEnable/Bin folder. http://www.mailenable.com/hotfix/metray.zip
You can double lick the metray.exe to launch the tray.
Regards, Andrew

webshaun
Posts: 246
Joined: Wed May 25, 2005 8:37 pm
Location: NJ
Contact:

Re: Missing information in System Overview / System Tray

Post by webshaun »

MEtray now causes windows to pop up and confirm a security warning to run at startup. "The publisher could not be verified"
---
Shaun Rieman
Advanced Micro Technologies, LLC

MailEnable
Site Admin
Posts: 4441
Joined: Tue Jun 25, 2002 3:03 am
Location: Melbourne, Victoria Australia

Re: Missing information in System Overview / System Tray

Post by MailEnable »

That is most likely because the server has UAC enabled - and it is being launched interactively.
ie: Perhaps UAC is warning when you launch it because it is being invoked as a user activation rather than being launched by the tray management.
I assume it runs fine once you OK the warning?

Perhaps if you logout and log back in again it will be fine (because it will be launched under the UI session rather than interactively).
Regards, Andrew

webshaun
Posts: 246
Joined: Wed May 25, 2005 8:37 pm
Location: NJ
Contact:

Re: Missing information in System Overview / System Tray

Post by webshaun »

I imagine that UAC is being triggered because of some security issue with copying the new file instead of having the installer do it and apply permissions.
---
Shaun Rieman
Advanced Micro Technologies, LLC

MailEnable
Site Admin
Posts: 4441
Joined: Tue Jun 25, 2002 3:03 am
Location: Melbourne, Victoria Australia

Re: Missing information in System Overview / System Tray

Post by MailEnable »

If thats the case, I think that can be fixed by selecting the file and accessing its security/activation properties.
The other alternative is to download and re-install, since the change was rolled into the current kits.
Regards, Andrew

webshaun
Posts: 246
Joined: Wed May 25, 2005 8:37 pm
Location: NJ
Contact:

Re: Missing information in System Overview / System Tray

Post by webshaun »

Thank you for that information. I'll wait till the next release or after hours for the reinstall. thank you!
---
Shaun Rieman
Advanced Micro Technologies, LLC

MailEnable
Site Admin
Posts: 4441
Joined: Tue Jun 25, 2002 3:03 am
Location: Melbourne, Victoria Australia

Re: Missing information in System Overview / System Tray

Post by MailEnable »

Thanks Shaun. Those stats were moved to a different screen that shows in the V7 version of the tray (so they were not needed where they were - and were removed without realising the effect on the V6 installations).
We kind of rushed to get it back in - so so sorry for the confusion.
Regards, Andrew

webshaun
Posts: 246
Joined: Wed May 25, 2005 8:37 pm
Location: NJ
Contact:

Re: Missing information in System Overview / System Tray

Post by webshaun »

I assume 7 will be released soon? That would be great. Thank you!
---
Shaun Rieman
Advanced Micro Technologies, LLC

MailEnable
Site Admin
Posts: 4441
Joined: Tue Jun 25, 2002 3:03 am
Location: Melbourne, Victoria Australia

Re: Missing information in System Overview / System Tray

Post by MailEnable »

Yes, it will be released in late November or earty December. Its been running production beta on pilot sites for a couple of months. The second phase of the beta will run for around 4 weeks.
Regards, Andrew

Post Reply