How to Enable Smtp TLS?
How to Enable Smtp TLS?
recently, I had removed the mailbox into my MailEnable server. but it had some problem, the SMTP tls function dose not work, it made the mailbox in domain: 1stip.com, can not send email to each other . How can I open the TLS in SMTP?
- Attachments
-
- 20210405182431.jpg (15.15 KiB) Viewed 16587 times
-
- 20210405181649.jpg (55.06 KiB) Viewed 16587 times
-
- Site Admin
- Posts: 9738
- Joined: Mon Mar 22, 2004 4:44 am
- Location: Melbourne, Victoria, Australia
Re: How to Enable Smtp TLS?
Hi,
Please see: https://www.mailenable.com/documentation/10.0/Enterprise/SMTP_props_-_Inbound.html
Please see: https://www.mailenable.com/documentation/10.0/Enterprise/SMTP_props_-_Inbound.html
Regards,
Ian Margarone
MailEnable Support
Ian Margarone
MailEnable Support
Re: How to Enable Smtp TLS?
I already seen this page https://www.mailenable.com/documentation/10.0/Enterprise/SMTP_props_-_Inbound.html
and also setting. but when I use telnet check, it dosen't show the starttls 250.
and also setting. but when I use telnet check, it dosen't show the starttls 250.
- Attachments
-
- 20210406113504.png (6.98 KiB) Viewed 16582 times
-
- 20210406113035.png (74.19 KiB) Viewed 16582 times
-
- Site Admin
- Posts: 9738
- Joined: Mon Mar 22, 2004 4:44 am
- Location: Melbourne, Victoria, Australia
Re: How to Enable Smtp TLS?
Hi,
Did you restart the SMTP connector after enabling the option? Also try and telnet locally on the server to "localhost" on port 25 and then check to see if the "StartTLS" extension is reported. This is a test to ensure that a proxy or gateway is not causing problems.
Did you restart the SMTP connector after enabling the option? Also try and telnet locally on the server to "localhost" on port 25 and then check to see if the "StartTLS" extension is reported. This is a test to ensure that a proxy or gateway is not causing problems.
Regards,
Ian Margarone
MailEnable Support
Ian Margarone
MailEnable Support
-
- Site Admin
- Posts: 9738
- Joined: Mon Mar 22, 2004 4:44 am
- Location: Melbourne, Victoria, Australia
Re: How to Enable Smtp TLS?
Hi,
What was was the solution? A restart?
What was was the solution? A restart?
Regards,
Ian Margarone
MailEnable Support
Ian Margarone
MailEnable Support