I searched this forum for this and the last that it came up with was around 2014 i think.
I have set up a new windows server with plesk. I enabled the mail service and created mailbox but was unable to log in. When I opened mailenable control panel via RDS i get the error:
Unable t load DLL 'measio.dll'. The specified module could not be found'.
With no further info on how to fix this to get mail working.
unable to load meaiso.dll
-
Admin
- Site Admin
- Posts: 1097
- Joined: Mon Jun 10, 2002 6:31 pm
- Location: Melbourne, Victoria, Australia
Re: unable to load meaiso.dll
Hi,
This means that the MailEnable paths are not in the PATH environment variable. The installer will try to do this without a restart required, but you may need to reboot the server for the change to take effect. You can check that the paths are added by opening a command prompt and entering the word path. When you press enter it will show the path and this needs to include the Mail Enable\bin and Mail Enable\bin64 directories.
This means that the MailEnable paths are not in the PATH environment variable. The installer will try to do this without a restart required, but you may need to reboot the server for the change to take effect. You can check that the paths are added by opening a command prompt and entering the word path. When you press enter it will show the path and this needs to include the Mail Enable\bin and Mail Enable\bin64 directories.
