AVG Anti Virus

Discussion, support and announcements for third party applications that work with MailEnable.
Post Reply
id10t
Posts: 1
Joined: Mon Aug 11, 2003 6:35 am

AVG Anti Virus

Post by id10t » Mon Aug 11, 2003 6:38 am

Has anyone tested with Gisoft Avg Antivirus?

If so were there any issues?

Dok

Post by Dok » Wed Aug 20, 2003 4:08 am

Seems to work fine. No problems since the time when ME realeased the ability to use it.

tad_braun
Posts: 60
Joined: Fri Feb 21, 2003 6:14 am

Command line used for AVG?

Post by tad_braun » Mon Aug 25, 2003 11:00 pm

Hello,

May I inquire about the exact commnd line used at your place for AVG? I am not sure how to set it up correctly...
---Thaddeus

MailEnable
Site Admin
Posts: 4441
Joined: Tue Jun 25, 2002 3:03 am
Location: Melbourne, Victoria Australia

Post by MailEnable » Tue Aug 26, 2003 2:08 am

AVG Version 6 will integrates with MailEnable using the default settings provided.

Grisoft recently revamped their product range and has changed their support and licensing reasonably significantly.

AVG Version 7 does not integrate with MailEnable professional correctly as it seems that some features are disabled when using the command line scanner (it is not obvious whether this is intentional or not). You can make it work using the AVG.EXE, however it is much slower and does not scan inside ZIP files.

If you edit the registry, you can make it work.

Set the following:

Code: Select all

Key name: HKEY_LOCAL_MACHINE\SOFTWARE\Mail Enable\Mail Enable\Agents\MTA\Filters\MEAVGRI
Antivirus Agent: C:\Program Files\Grisoft\AVG7\avg.exe
Antivirus Parameters: "[AGENT]" "[FILENAME]" /ARC /NOMEM /NOHIMEM /NOSELF /EXT=*
We have currently confirmed this with both the Personal Version and File Server Version. (Both command line scanners appear to function the same).
Regards, Andrew

akira

Post by akira » Mon Sep 01, 2003 8:12 am

@support i did exactly what have you post in this topic i even create a key in the registry as filters and MEAVGRI so what's next?how can i use AVG as mail antivirus?

MailEnable
Site Admin
Posts: 4441
Joined: Tue Jun 25, 2002 3:03 am
Location: Melbourne, Victoria Australia

Post by MailEnable » Tue Sep 02, 2003 7:22 am

Those keys should already be there. Are you sure your in the right place. HKEY_LOCAL_MACHINE\SOFTWARE\Mail Enable\Mail Enable\Agents\MTA\Filters has to be there (without you creating it) - otherwise you should re-install pro.
Regards, Andrew

drarock_guisella
Posts: 1
Joined: Wed Feb 28, 2007 5:03 pm

Post by drarock_guisella » Wed Feb 28, 2007 5:06 pm

I'm using AVG Email Server Edition, and i can't make work the filter, i followed the steps in the help but i get the message

---------------------------

There appears to be an error with the antivirus configuration. Please check your settings and make sure no resident scanner is active.

---------------------------

OK


And the log file shows the following line:
02/28/07 10:58:37 LOG FILE STARTED
02/28/07 10:58:37 Loaded Plug-In Filter [MTAFILTER]

I thought that should say [AVG.....]

And of course it doens't detect the eicar virus when i send an email.

Help!

optweb
Posts: 1
Joined: Mon Mar 19, 2007 9:50 am

AVG Fiile Server ver 7.5

Post by optweb » Mon Mar 19, 2007 12:28 pm

Hi all. I have installed the 7.5 version of AVG but I get an error when trying to connect using the version 6 in the MailEnable Enterprise program.

DOes anyone have the command line that works or tips on how to configure please.

regards
Gary

LoadWB
Posts: 1
Joined: Sat Jun 30, 2007 5:16 am

AVG command line scanner

Post by LoadWB » Sat Jun 30, 2007 5:17 am

Use the options provided by MailEnable above, but try the command "avgscan.exe" rather than just "avg.exe". You might also want to use /NOBOOT -- this skips scanning the MBR and boot sector.

gustavow
Posts: 30
Joined: Wed Sep 29, 2004 2:35 am
Location: Argentina

Post by gustavow » Thu Aug 09, 2007 5:09 pm

can anyone tell me if mailenable professional supports AVG Internet Security Version?

In case it support, witch version will be the best option?
Thanks
Gustavo W.

globalmcs.net
Posts: 111
Joined: Thu Apr 14, 2005 4:32 pm
Location: Tampa Bay
Contact:

Post by globalmcs.net » Sat Mar 08, 2008 6:36 am

Anyone testing AVG 8 ?
tried to get avgscanx.exe to work ?

eskinner
Posts: 6
Joined: Fri Mar 21, 2008 3:00 pm

Post by eskinner » Wed Apr 09, 2008 1:57 pm

Any thoughts at all on AVG 8?

mlai
Posts: 18
Joined: Mon Jun 12, 2006 4:07 am

Post by mlai » Mon May 19, 2008 4:24 am

Seems that nobody is using AVG8 with Mailenable? I couldn't get them to work and would appreciate some help also.....

Post Reply